Skip to main content
Heated Bus Shelters

Heated Bus Shelters

Radiant overhead heating panels triggered by motion sensor — thermal comfort below -30°C, heated bench seat option.

Heated Bus Shelters
Product Details

Heated Bus Shelters

Heated bus shelters are essential on routes where waits exceed 10 minutes and outdoor temperatures drop below -15 °C — which is most of Canada from November through March. BusShelters. ca heated shelters use radiant ceiling panels rated 800–2400 W with a wall-mounted thermostat and PIR motion sensor that runs the heat only when a rider is present and dims to standby when empty.

800–2400 W radiant ceiling panel siz…Insulated ceiling cassette + double-…PIR motion sensor and wall thermosta…Optional 250–400 W heated bench surf…
Get a Quote
Specifications

Features & Specifications

800–2400 W radiant ceiling panel sized to shelter footprint and design temperature
Insulated ceiling cassette + double-glazed argon-filled IGU walls (U=1.4 W/m²K)
PIR motion sensor and wall thermostat — heat only when rider present, 20% standby
Optional 250–400 W heated bench surface (popular for STM and AODA-elderly specifications)
240 V single-phase, 15A/20A GFCI circuit; full electrical drawings for AHJ review
Solar-heated combo available: 1500 W on 600 Ah / 48 V battery, ~4 hr/day at -20 °C
Operates to -45 °C with cold-rated gaskets and ceramic-element heaters
Smart-thermostat option with cellular telemetry for fleet-wide energy reporting
Description

About Heated Bus Shelters

Key Takeaways

  • Key features: 800–2400 W radiant ceiling panel sized to shelter footprint and design temperature, Insulated ceiling cassette + double-glazed argon-filled IGU walls (U=1.4 W/m²K), PIR motion sensor and wall thermostat — heat only when rider present, 20% standby

The heater is mounted to an insulated ceiling cassette to cut downward radiant losses and protect the heating element from condensation. Wall and roof glazing is double-glazed insulating glass unit (IGU) with argon fill and low-E coating, giving a U-value of 1. 4 W/m²K versus 5. 7 for single-pane — about 75% less heat loss through the walls.

Heated Bus Shelters — Engineering & Construction

The bench can be specified with 250–400 W radiant heating in the seat surface, which is a Quebec-popular feature for elderly transit users. Heated shelters require a 240 V single-phase service drop with a 15 A or 20 A circuit, GFCI-protected. We provide the electrical schedule, panel schedule, and stamped electrical-on-utility-pole diagram for the AHJ review. For sites without grid access, see our solar-heated combo which uses a 1500 W heater on a 600 Ah / 48 V battery — runs about 4 hours per day at -20 °C, sized for peak commute windows.

Installation & Compliance

Heated shelters are most often specified by STM (Montréal), OC Transpo (Ottawa), Edmonton Transit, Winnipeg Transit, Saskatoon Transit, hospital transit nodes, and university campuses. Lead time is 8–12 weeks. Pricing adds $3,000–$7,000 to the standard structure depending on heater wattage, bench heat option, and IGU spec. Heated-shelter installation is 3–5 working days including the electrical service drop, panel commissioning, and thermostat / PIR-sensor calibration.

Warranty & Support

Energy consumption depends heavily on duty cycle: a 1500 W heater running 8 hours per day during a 5-month Canadian winter at PIR-driven 40% duty cycle uses about 720 kWh per shelter per season — at the typical commercial rate of $0. 13/kWh that's $94 per shelter per winter. Smart-thermostat shelters cut this 30–45% by tightening the rider-presence window. Warranty is 10 years on the structure, 8 years on the IGU (sealed-unit failure), 3 years on the heater element, 5 years on the thermostat / PIR control, and 2 years on the bench heat.

Procurement & Lead Time

Annual maintenance is a fall pre-season heater test and gasket inspection — typically $250–$500 per shelter per year, plus winter call-out if the heater faults. Key Takeaway: Climate-rated, AODA-compliant, and stamped-engineered for Canadian transit deployment — full procurement documentation included.

Comparison

Product Specifications

SpecificationDetails
ProductHeated Bus Shelters
Frame & Glazing6063-T6 aluminum frame; 6 mm tempered safety glass to CSA Z97.1 (polycarbonate option)
InstallationBonded crews, full traffic-management, 3–4 working days per site
Warranty10-year structural; 5-year glazing & bench; 48-hour replacement-parts SLA
ComplianceNBCC 2020 stamped engineering; AODA / CSA B651-18 accessibility
Lead Time6–10 weeks standard configurations; 8–14 weeks custom
Benefits

Why Choose Heated Bus Shelters?

Heated Bus Shelters from BusShelters.ca are engineered for Canadian transit conditions — climate-rated, accessibility-compliant, and shipped with full procurement documentation so AHJ review is single-pass.

Built for Canadian WintersStamped to NBCC 2020 snow and wind loads for every Canadian municipality — frost-depth footings from 0.6 m to 3.0 m.
Procurement-ReadyStamped drawings, BOM, COC, and as-built package delivered with every shipment so AHJ review is single-pass.
AODA & CSA CompliantMeets AODA, CSA B651-18 accessibility, and CSA Z97.1 safety-glass requirements without optional add-ons.
48-Hour Parts SLAReplacement glazing, panels, and benches ship within 48 hours from our Brantford, Ontario warehouse.
FAQ

Frequently Asked Questions About Heated Bus Shelters

How much does a bus shelter cost in Canada?

In Canada, standard freestanding bus shelters typically run $6,500–$14,000 for the structure plus $2,500–$6,000 for installation, including footings and electrical. Solar-powered units add $1,500–$3,500, and heated shelters add $3,000–$7,000 depending on heater wattage and bench heat. Custom architectural shelters for heritage districts or campuses can reach $25,000–$60,000+. Volume orders of 20+ units typically reduce per-unit pricing by 15–25%. Lifecycle cost is the better lens than first-cost: a stamped-engineered shelter with a 10-year structural warranty and a 48-hour parts SLA typically delivers a 15–18 year service life on the structure and 5–8 years on glazing and benches before refresh, which works out to roughly $1,000–$1,800 per shelter per year total cost of ownership including maintenance. Off-grid solar and heated configurations carry a higher first-cost but eliminate trenched-electrical and ongoing utility charges, which on rural sites pays back inside 6 years.

Can bus shelters be installed without a power connection?

Yes — our solar-powered models include a roof-mounted PV array, sealed gel battery, and LED lighting that runs autonomously through Canadian winter daylight. No trenching, no electrical permit, no service connection. Heated and smart-display models still require grid power or a higher-capacity solar+battery system; we'll size that to your site during quoting. The hidden cost saving on off-grid installs is the electrical-trenching avoidance: a typical grid-connected shelter requires $4,000–$12,000 of trenching, conduit, and service-drop work depending on the distance to the nearest utility pole or transformer, plus utility connection fees and ongoing electrical billing. A solar-PV configuration eliminates that cost entirely. For sites that need heat as well, our solar-heated combo carries a 1500 W heater on a 600 Ah / 48 V battery, suitable for 4-hour peak-commute heating windows at -20 °C without a grid feed.

Can I see a bus shelter in person before ordering?

Yes. Our showroom in Brantford, Ontario displays full-size production units of every product line. We also maintain installed reference sites in Toronto, Montreal, Vancouver, Calgary, and Halifax that prospective municipal clients can visit by appointment. Engineering and procurement teams can request stamped drawings and material samples shipped overnight. Our showroom in Brantford, Ontario has full-size examples of every product line — standard, solar, heated, accessible, smart, modular, and several custom-architectural pieces — set up as you'd see them on the street. We host site visits Monday–Friday 8am–5pm Eastern by appointment; group visits for transit-authority procurement teams are common and we'll co-ordinate the agenda with your team's schedule. For teams outside Ontario, we can also direct you to deployed-in-the-field reference sites in your region — most of our recent municipal installs have a public-right-of-way location available for inspection.

How do I get a quote?

Call (888) 663-2244 or use our online quote form. Provide site address, quantity, preferred shelter type (standard / solar / heated / accessible / smart), and any special requirements (advertising panels, branded glass, custom dimensions). Quotes typically return within 2 business days with stamped drawings, NBCC-engineered loads for your city, and CCDC-ready contract forms. The fastest path is the online quote form on each product page — fill the quantity, configuration, and ship-to province and we typically respond within one business day with a written quote PDF. For complex projects (custom design, multi-shelter networks, RFP responses), book a scoping call with our project-engineering team via the contact page; the call surfaces the right product family, options, and budget envelope before we put pricing together. For municipal and government-procurement RFPs, send the bid documents to bids@busshelters.ca and our bid desk responds within 5 working days.

Need Heated Bus Shelters?

Our bid desk responds to every quote and RFP within one business day. Volume discounts available on 20+ unit orders.